Visit The Dirt Forum for More Information

Author Topic:   cam advance
YAZ
Dirt Maniac

Total posts: 147
posted October 05, 2005 08:53 PM  
how far can you advance a cam in a sb chevy.
flat tops?

nine finger
Dirt Forum Racer

Total posts: 76
posted October 06, 2005 09:24 AM  
6 to 8 degrees usually all you need,if you need more go to a smaller cam.

YAZ
Dirt Maniac

Total posts: 147
posted October 06, 2005 06:02 PM  
I HAVE A 106 ADVANCED 5 DEGREES.
I WANTED TO TRY 7 DEGREES, BUT READ THAT
THE VALVE MIGHT HIT THE PISTON, I DONT KNOW
IF THATS AN ISSUE WITH FLAT TOPS.

YAZ
Dirt Maniac

Total posts: 147
posted October 09, 2005 08:34 PM  
Is anyone running there cam advanced
to 99 degrees?

skippydoo
Dirt Roller

Total posts: 18
posted October 10, 2005 06:52 PM  
I had a 2bl motor from a good builder in ny state. All his cams for 2bl are 106 installed at 99. they run good. 250/260@.050

YAZ
Dirt Maniac

Total posts: 147
posted October 10, 2005 09:57 PM  
Thanks Skippydo.
I am going to try it next season.

Back to the Archives