Visit The Dirt Forum for More Information

Author Topic:   1969 ford 351 windsor heads
brabbit75
Dirt Full Roller

Total posts: 28
posted August 22, 2005 04:49 PM  
Does anyone know how many cc's a stock 1969 351 windsor head has? I have been told that they have smaller combustion chambers than the newer heads. It has not been machined at all, and is coompletely stock. I would like to know, as I am trying to figure out compression ratio on my motor. Thanks

purestock97
Dirt Full Roller

Total posts: 32
posted August 22, 2005 07:32 PM  
64 cc's

akadirtracer7
Dirt Freak

Total posts: 217
posted August 22, 2005 08:27 PM  
I think about 60 cc

J3
Dirt Maniac

Total posts: 188
posted August 23, 2005 07:18 AM  
64 cc's


mike9
Dirt Full Roller

Total posts: 72
posted August 24, 2005 01:17 PM  
the 69 heads were 58 cc the 70 heads were 60 cc the early 289 heads had 54 cc the windsor heads went to 64 cc in 72 then about 74 or 75 they became 67cc

hotrodenford
Dirt Full Roller

Total posts: 60
posted August 24, 2005 05:21 PM  
http://www.mustangii.net/head.asp

This site says 60.4cc for '69-'77 and 69cc for '78-'80. Sounds kinda small to me but they also ran dished pistons to bring down the c/r.

------------------
If it has wheels or a skirt, you can't afford it! But they shure are fun...

brabbit75
Dirt Full Roller

Total posts: 28
posted August 24, 2005 06:07 PM  
Thanks for all the replies, I really appreciate it.

Back to the Archives