Visit The Dirt Forum for More Information

Author Topic:   Cam
mansfief
Dirt Maniac

Total posts: 128
posted August 01, 2005 12:11 PM  
Has any body used, or using now, Speedway cam, part #14102 (Dur @ .050 I 250 - E 260, Adv Dur is, I 285 - E 295), with 533 I and 555 E lift. The reason I am asking, I am putting together a new engine (350 40 over) with 12 to 1 compression and Dart 200 cc heads, and Power Plus open intake. Short 3/8ths, medium banked, 3200 lb + metric with Powerglide.

streetstock82
Dirt Forum Racer

Total posts: 81
posted August 01, 2005 09:12 PM  
the engine we have in our b-mod is almost the same as yours except we have double humps and the elgin version of that cam (287) (295) duration, .537-.557 lift 99 degree lobe center. Its a little different from you but its close enough other than idle quality it should be close. It runs gret and makes good power. our fastest street stocks use that cam in comp cams and they all run excellent. its a good solid chouce

mansfief
Dirt Maniac

Total posts: 128
posted August 02, 2005 07:00 AM  
Thanks for the info. That will save me some money which I need a lot of.

ktcm23
Dirt Roller

Total posts: 5
posted August 02, 2005 04:45 PM  
I put the same cam in my street stock that streetstock82 did last week and it cam alive. Now I have to learn to drive with more power. Been lacking on power tell last week. I even run double hump heads and stock intake.

Back to the Archives