Visit The Dirt Forum for More Information

Author Topic:   4 inch stroke 350
Dirt Full Roller

Total posts: 43
posted July 07, 2005 07:44 PM  
I am getting ready to build a new motor. was thing about using a 4 inch stroke crank and 350 block. I have a set of 487 heads milled down to 64 cc. I have heard you cant get a motor that big to breath. With my open chamber heads I think it might work. What is your info.

Dirt Maniac

Total posts: 129
posted July 07, 2005 08:00 PM  
I believe you will have crank clearancing problems unless you use an aftermarket block.

Back to the Archives