Visit The Dirt Forum for More Information

Author Topic:   valve lash
ready2race23
Dirt Full Roller

Total posts: 45
posted July 06, 2005 09:23 PM  
On the valve lash. Do you set it snug loose tight when hot? My wife use to do all this while i worked now she works more than i do.
Thank you in advance

leapinlizard
Dirt Freak

Total posts: 402
posted July 07, 2005 07:39 AM  
solid or hyd cam?

ready2race23
Dirt Full Roller

Total posts: 45
posted July 07, 2005 09:33 AM  
SOLID FULL ROLLER ROCKERS

leapinlizard
Dirt Freak

Total posts: 402
posted July 07, 2005 10:07 AM  
Look on comp cams web site for full directions. take your time, it isn't hard

D9Dave
Dirt Full Roller

Total posts: 43
posted July 07, 2005 07:45 PM  
Good woman to set your valves for you

ready2race23
Dirt Full Roller

Total posts: 45
posted July 07, 2005 08:02 PM  
SHE USE TO BUILD FROM GROUND UP. I WOULD HELP PUT IT THE CAR. NOW THAT SHE IS A NURSE SHE DOES NOT HAVE THE TIME SO IT IS BACK TO ME DOING IT ALL. MY 9 YR OLD HELPED ME THIS TIME.

DangerZoneRacing
Dirt Maniac

Total posts: 176
posted July 07, 2005 09:10 PM  
Prime example of "Family Sport". Now if I could only get my 10 month old to change my tires....hmmmm, lol. Good luck.

[This message has been edited by DangerZoneRacing (edited July 07, 2005).]

speedwrench
Dirt Roller

Total posts: 16
posted July 08, 2005 09:01 PM  
Tight when hot,loose when cold

speedwrench
Dirt Roller

Total posts: 16
posted July 08, 2005 09:03 PM  
Speedway has a good valve sequence in their catologe works really good and easy to remember

Back to the Archives