posted July 03, 2005 07:52 PM
i am wanting to no if i run a 510 lift hyd cam on a head the has springs for a cam up to 600 lift are the springs going to eat my cam and lifters .the cam i run now is a sold lift 525/535 lift.
beachracing Dirt Forum Racer
Total posts: 94
posted July 03, 2005 08:35 PM
No, that's only what they are rated up to. Make sure you test your seat pressure to determine when your springs are leaving the valve seat. As long as your springs have the proper seat pressure for the cam, I don't see anything wrong with the springs. I would double check to see if those springs are recommended for your cam. One way to change seat pressure is shimming, but it should be done by a good head builder.