Visit The Dirt Forum for More Information

Author Topic:   AC comp. eliminator
ready to race
Dirt Roller

Total posts: 7
posted June 22, 2005 07:32 AM  
Looking to remove the AC compressor from my 91 chevy 350 (I think it was from a truck) and keep the serpentine setup with the reverse water pump deal. Has anyone run into this problem- is there a way to weld in an ideler pulley in the compressors place?

Dirt Forum Racer

Total posts: 99
posted June 22, 2005 03:22 PM  
There is actually a bracket that goes in place of the comp. check a junk yard they should be able to help you out. a 4.3 v6 should also use that bracket on non a/c vehicles. The comp. is on the pass side and the bolts go through the front right?? if so that's it. Josh K.

Dirt Freak

Total posts: 402
posted June 22, 2005 08:15 PM  
Just go to carquest and get one. I think they are around $50 but they bolt right in place of the compressor and use the stock belt.

Back to the Archives