Visit The Dirt Forum for More Information

Author Topic:   Missing
Alltel
Dirt Maniac

Total posts: 180
posted June 04, 2005 10:11 PM  
The car has a high end miss to it. It runs fine up until about 6000 rpm and then it picks up a miss that just occurs at random. I have a new MSD 6AL box, plugs, and wires. I'm using an old HEI distributer converted to work with the MSD box. What could be causing this?

Panky AMCA 21
Dirt Roller

Total posts: 11
posted June 05, 2005 03:14 AM  
You could check your coil, I use the same MSD box in mine & had to get a blaster coil to keep up with the voltage. You could also check your distributer spring weights, it may be over advancing.When you fit the MSD you will find the timing advanced even though you havn't mooved the distributer. Is this problem only since you fitted your MSD?
Also what have you set your plug gaps to.

[This message has been edited by Panky AMCA 21 (edited June 05, 2005).]

crazyhorse
Dirt Roller

Total posts: 15
posted June 05, 2005 08:28 PM  
Is yhis a hydraulic cam or solid?if its hydraulic you could be floating the valves

Alltel
Dirt Maniac

Total posts: 180
posted June 06, 2005 01:14 PM  
It is a solid cam with good springs. It feels like the electricity just cuts in and out around 6000. I was wondering about using the HEI distributor with the MSD system. No springs, it is welded solid. Plug gaps at 40.

sideways
Dirt Forum Champ
Total posts: 715
posted June 06, 2005 08:04 PM  
Do you have a ground strap to the frame and the engine?I have one from the water pump to the frame and battery ground is one the roll cage.Just a thought.

Back to the Archives