Visit The Dirt Forum for More Information

Author Topic:   piston and rods
thebomb
Dirt Maniac

Total posts: 149
posted April 01, 2005 01:11 PM  
ok guys dumb question but bare with me, im wondering if im screwed, have a set of rods with,.867 pin size, and set pistons with .927 pin size, please any info is appreciated,

leapinlizard
Dirt Freak

Total posts: 402
posted April 01, 2005 01:58 PM  
Not a stock rod?

thebomb
Dirt Maniac

Total posts: 149
posted April 01, 2005 01:59 PM  
nope the rods are a set of corillo, pistons bme

leapinlizard
Dirt Freak

Total posts: 402
posted April 01, 2005 02:08 PM  
DOn't know a lot about those rods bt you might be able to opne them up .060 and bush them. Maybe even bush for floating pins.

sdhnc29
Dirt Forum Champ
Total posts: 934
posted April 01, 2005 08:39 PM  
You will need to get a set of .927" rod's, or have a set of pistons made with .867" pin bores. I assume the rod's you have are not bushed, and designed to be used with a coated pin as well. I also assume they are Honda rod journal size as well, since this is a common pin bore size for that rod.

Steve

------------------
Hendren Racing Engines
Rutherfordton , NC
(828)286-0780
http://www.hendrensracingengines.com

stockcar5
Dirt Forum Champ
Total posts: 578
posted April 02, 2005 10:15 AM  
get some pistons with a .867 pin bore

------------------
www.geocities.com/dirtstockcar5

[This message has been edited by stockcar5 (edited April 02, 2005).]

Back to the Archives