posted March 31, 2005 06:10 AM
Wondering about what horse power my new engine will have, Any help.
sbc 350 4 bolt main bored 30 over crank is .010 / .010 flat top pistons with 4 valve relieve .480 lift .268 dur cam holly 650 carb accel hei dist vorte heads edelbrock performer RPM intake
Thanks for any help.
DIRTDOG311 Dirt Full Roller
Total posts: 36
posted March 31, 2005 06:39 PM
should have about 350 hp@5500 rpm and about360 lb. ft. of torque@4000rpm.
------------------ for all you do, this mud's for you
elgentry Dirt Roller
Total posts: 14
posted March 31, 2005 09:10 PM
Thanks, I guessing it at 325 hp. Did you use a desk top dyno, if so which one?
dirtbuster Dirt Forum Champ
Total posts: 2007
posted April 01, 2005 09:43 AM
car craft or super chevy or one of those tested one of those engines a few years ago when Vortec heads first got real popular. It was almost identical to your combo and I think it made like 400HP and roughly 400 torque.
My desktop dyno says roughly 360 hp and just shy of 400 torque. For what its worth.....