Visit The Dirt Forum for More Information

Author Topic:   Nylon
ryan
Dirt Forum Champ
Total posts: 776
posted March 23, 2005 09:28 PM  
Anybody know where I can get Nylon s.crews for my rotor in a Hei. I don't ever recall seeing them in the catalogs, but maybe I didn't look hard enough.

NJantz
Dirt Forum Champ
Total posts: 755
posted March 24, 2005 05:14 AM  
I'd give DUI a call.

NJantz
Dirt Forum Champ
Total posts: 755
posted March 24, 2005 05:15 AM  
Also the local hardware stores sometimes have nylon screws.

istock59
Dirt Forum Champ
Total posts: 501
posted March 24, 2005 06:19 AM  
www.mcmaster.com would probably have them. Might have to buy more than you'd ever need tho.

TEAMPCR
Dirt Freak

Total posts: 238
posted March 24, 2005 08:57 AM  
ACE Hardware has nylon hardware.

ryan
Dirt Forum Champ
Total posts: 776
posted March 24, 2005 08:26 PM  
Thanks everybody.

o5racer
Dirt Freak

Total posts: 402
posted March 24, 2005 10:17 PM  
CHEATER!!!!!!!
I am going to agree with the others. Check bomgars,TSC, ace or menards. Why do you need nylon screws anyway? Spark jumping with that MSD?
Nick

stockcar5
Dirt Forum Champ
Total posts: 578
posted March 25, 2005 10:47 AM  
jr motorsports also has the dui nylon screws.

------------------
www.geocities.com/dirtstockcar5

ryan
Dirt Forum Champ
Total posts: 776
posted March 25, 2005 08:49 PM  
Hmm didn't see in the rules that you couldn't run nylon screws. I figured with running an 18 volt system that it would be a good idea. You're the cheater you can't find one thing illegal with my car. Can you say the same??
By the way have you been locked out of your car lately?

[This message has been edited by ryan (edited March 25, 2005).]

o5racer
Dirt Freak

Total posts: 402
posted March 26, 2005 06:00 PM  
Somehow I knew the door lock thing would come up again. I was in menards 2 hours ago and they have nylon screws there. 6-32 up to 1/4. In the plastic pull out bins with the machine screws.
Nick

ryan
Dirt Forum Champ
Total posts: 776
posted March 26, 2005 09:23 PM  
So did you buy me a couple?? Anybody know the size of the screws off the top of their heads. Got my car lettered today and you will be jealous.

o5racer
Dirt Freak

Total posts: 402
posted March 27, 2005 08:26 AM  
I didnt know what size you need. Just take one of your old ones to menards. I have to go finish painting mine today. God I hate bodywork.
Nick

Back to the Archives