Visit The Dirt Forum for More Information

Author Topic:   Maybe too much pan to pickup clearance?
dan63
Dirt Full Roller

Total posts: 44
posted March 12, 2005 09:56 PM  
Without gasket I have 1/2 inch between pan and pickup. Should I start bending to get it to a 1/4 inch?

waltonjr1
Dirt Forum Champ
Total posts: 516
posted March 13, 2005 06:09 AM  
3/8 make sure you factor in the pan gasket thickness.


racin78p
Dirt Freak

Total posts: 333
posted March 13, 2005 05:58 PM  
Ditto. Take your time and do it right. Really matters here.

------------------
racin78p
if it ain't fun, then don't run

NJantz
Dirt Forum Champ
Total posts: 755
posted March 14, 2005 01:52 PM  
Yes get it right or you might kick yourself later. Might weld the pickup on if you dont do that already.

Here's a link that you might find helpful http://www.jrmotorsports.com/techinfoengines.cfm#1

Back to the Archives