Visit The Dirt Forum for More Information

Author Topic:   converting thousandths to cc's
0LT
Dirt Full Roller

Total posts: 38
posted February 22, 2005 03:53 PM  
I am doing a few calculations with static compression ratio and cannot seem to find the conversion calculations for thousandths to cc's.
I have a 350 chevy bored .040 with flat top pistons .018 in the hole. I would like to know what that .018 is in cc's.
Can anyone help?
Thanks,
LT

stockcar5
Dirt Forum Champ
Total posts: 578
posted February 22, 2005 04:00 PM  
Below Deck Volume) = Bore(in) X Bore(in) X 12.87 X (Inches Below the Deck)


so 4.040x4.040x12.87x.018=4.117cc

------------------
www.geocities.com/dirtstockcar5

0LT
Dirt Full Roller

Total posts: 38
posted February 22, 2005 04:21 PM  
stockcar 5,
Thanks for the quick help with the calculation. I ran the numbers and came up with

4.040 x 4.040 x 12.87 x .018 = 3.78cc

Who's wrong?

LT

dirtbuster
Dirt Forum Champ
Total posts: 2007
posted February 22, 2005 05:22 PM  
should be 3.78


stockcar5
Dirt Forum Champ
Total posts: 578
posted February 22, 2005 05:46 PM  
lol...at least i got the formula right! now if i only knew how to use a keyboard.

------------------
www.geocities.com/dirtstockcar5

TEAMPCR
Dirt Freak

Total posts: 238
posted February 23, 2005 11:57 AM  
The "Toolbox" has a conversion program you can download. Once you figure the cubic inches, plug it in and tell the program what you want.

Back to the Archives