Visit The Dirt Forum for More Information

Author Topic:   Willy's, Braswell or BLP?
Dirt Full Roller

Total posts: 46
posted February 12, 2005 07:44 AM  
I'm looking at getting a new alcohol carb and every carburetor builder I talk to says theirs is the best so I was looking for opionions from guys that race them on which brand you think is the best? The carb is going to be used in a dirt late model with a Ford engine and N351 heads. Thanks

Dirt Full Roller

Total posts: 42
posted February 12, 2005 08:08 AM  
Get with Tony Wilson, at Wilson Competition in Memphis TN.

You will save yourself some money and still get a first class carb. I have ran his carb for more than 3 season trouble free. Plus when I call, with questions I talk to Tony directly and get straight answers right away including helping me w/what size lines to run etc. just good people.

Here is there website,

unregistered Total posts: 42
posted February 12, 2005 08:35 AM           send a private message to mekomod51   Edit/Delete Message   Reply w/QuoteBBBBBB

You wont be disapointed or charged more because of some businesses name!!!

Ive had a couple fellow racers send him 4 350cfm Dortons.

Had an extra done and sold it to someone I race against.

And at least another is shortly on its way to Dayton Im pretty sure.

All based on how my car has performed with his carb and my I assume limited motor compared to what these other guys are running. And Im a rookie on dirt and only ran a dozen races last year!!

At this rate maybe Dayton should send me some vynil to put on the side of my car and do a couple more of my open show carbs for me!!!

Dirt Freak

Total posts: 259
posted February 12, 2005 09:09 AM  
Braswell by far.

maniac motors
Dirt Maniac

Total posts: 128
posted February 12, 2005 07:53 PM  
support the people on this site try kinetic performance you wont be dissapointed

Dirt Maniac

Total posts: 144
posted February 13, 2005 10:36 AM  
I ran a KP carb, last season- no problems- great carb! The demon is sittin' on the work bench!

Dirt Freak

Total posts: 279
posted February 13, 2005 09:17 PM  
If you can afford a Braswell, your carburation issues are over.

Dirt Full Roller

Total posts: 32
posted February 14, 2005 09:35 PM  
c @ s has done wonders for us they build a great open carb the billet or non easy to work with and flow on the dyno.

Back to the Archives