Visit The Dirt Forum for More Information

Author Topic:   H2O Temp sender location
XC man
Dirt Full Roller

Total posts: 39
posted January 22, 2005 06:44 AM  
Would it be ok to run the temp sender in the top port of the water pump ?

Dirt Forum Champ
Total posts: 578
posted January 22, 2005 10:25 AM  
the best place to put it is near the t-stat housing. this is where the water temp is highest (just before it enters the radiator). i run mine on the intake just before he t-stat housing.


Dirt Freak

Total posts: 226
posted January 22, 2005 11:39 AM  
you can if you want, but like said above its best to run in on the manifold, thats where most everyone runs it


unregistered Total posts: 226
posted January 22, 2005 04:24 PM           send a private message to hobby10k   Edit/Delete Message   Reply w/QuoteBBBBBB
Top of the water pump would tell you the temp of the water going into your motor, not out of your motor which is what you should be more concerned with.

The Flash32
Dirt Maniac

Total posts: 120
posted January 22, 2005 04:35 PM  
Plus wouldn't be a pain for something as simple as changing a water pump or changing a leaking gasket? Just a thought!

Back to the Archives