posted January 19, 2005 07:55 PM
i am thinking ot building a new motor, and have pro topline heads already in my shop. i really have liked them. but have heard a dome piston is hard to get for them. so i was thinking of having heads angle milled and running flat tops. what would the price tag be on this? no porting or polishing just angle milled and whatever else will be needed to make the heads work.(i dont know a whole lot about heads). also how much for a good port/polish? thanks jason
2nd2none Dirt Forum Champ
Total posts: 755
posted January 19, 2005 08:11 PM
I paid salina engines $1100 for a full port job on my iron eagles, and that included a complete valve job and cutting the spring pockets for a 1.650" spring.
the 215cc iron eagles flowed 302cfm after they where done.
dirtracer14 Dirt Forum Champ
Total posts: 1261
posted January 19, 2005 09:53 PM
I run a dome with my pro heads(64 cc) the only real problem was making sure the plug didnt hit.