Visit The Dirt Forum for More Information

Author Topic:   Headers for Dart Heads
marshalr
Dirt Maniac

Total posts: 148
posted January 14, 2005 07:49 AM  
I bought a set of Dart Iron Eagles last year. 215CC straight plug on a SBC.
Had trouble getting #3 plug installed. the plug holes are straight but they seem to angle down slightly. I've had to beat clearance into the header tube at that point. My headers were Flowtech brand, 1-5/8"
Would like to know if anybody who is running these heads has experienced the same problem. What headers are people running that have plenty of clearance.
I called SDPC where i bought them, they recommended schoenfelds, but want to know if they will clear before i buy.
Thanks

------------------
Some People Race For A Living; I Live To Race

stockcar5
Dirt Forum Champ
Total posts: 578
posted January 14, 2005 10:48 AM  
they clear fine with schoenfelds for a metric chassis in a stockcar.

------------------
www.geocities.com/dirtstockcar5

chomme
Dirt Freak

Total posts: 300
posted January 14, 2005 01:14 PM  
81 Camaro front clip.
Send me a pm with sizes and prices, your e mail --- Thanks!

------------------
Some People Race For A Living; I Live To Race

RadDad03
Dirt Newbie

Total posts: 3
posted January 21, 2005 07:03 AM  
Hmmm, I got the same stuff you just described, (dart, flow..., Camaro sub), and mine line up fine. It's a little tight around there, But I also run the shorty plugs, for headers, From accel.
Hope this helps ya, Good Luck!

Back to the Archives