Visit The Dirt Forum for More Information

Author Topic:   newer motor flywheel
iowa_dirt_track_girl
Dirt Freak

Total posts: 461
posted December 30, 2004 06:55 PM  
I need to know what flywheel to run with a one piece rear main seal i have heard that a 302 ford flywheel is the same weight cause of the weight? I would like to run a manual tranny but dont want the weight of a 30lbs flywheel or the money to turn one down that far it would be nice to be around the 15 to 10 lbs range if possible.

quietmans
Dirt Forum Racer

Total posts: 97
posted December 31, 2004 04:23 AM  
Are you talking about a chevy or ford motor here??

iowa_dirt_track_girl
Dirt Freak

Total posts: 461
posted January 02, 2005 05:19 PM  
chevy motor

dode
Dirt Forum Champ
Total posts: 613
posted January 04, 2005 08:42 AM  
Well we ran a flex plate off a blazer 4.3l 153 tooth.The one peice rear main seal engine has to be externally balanced.I am not sure of the weight of a blazer flywheel as oppose to another one?That is all I can help with.Were not allowed manuals so I dont know much about flywheels.

mudd on the tires
Dirt Full Roller

Total posts: 42
posted January 05, 2005 08:10 PM  
btt

OLSONRACECARS
Dirt Roller

Total posts: 22
posted January 05, 2005 09:37 PM  
I have an aluminum flywheel for one with the pressure plate and 4 finger disc if interested also have steel bell housing and lightend 3 speed for sale.

iowa_dirt_track_girl
Dirt Freak

Total posts: 461
posted January 06, 2005 07:28 PM  
well i just talked to 10,000rpm and the flywheel i need is 329 dollars and the clutch i need is 189 darn expensive if you ask me so if anybody does have that flywheel let me know the price but sorry guys it needs to be steel cause if i get claimed it will cost 100 dollar fine but i have no other choice unless i sell the motor

rico 08
Dirt Forum Champ
Total posts: 1139
posted January 06, 2005 07:57 PM  
check your pm's

[This message has been edited by rico 08 (edited January 06, 2005).]

Back to the Archives