Visit The Dirt Forum for More Information

Author Topic:   2-pc rear main adapter
TEAMPCR
Dirt Freak

Total posts: 238
posted December 20, 2004 03:40 PM  
Take a look at this and tell me what you think.
http://www.jegs.com/cgi-bin/ncommerce3/ProductDisplay?prrfnbr=1778&prmenbr=361

I have a 1-pc rear main block that I built last year and barely ran. This year I bought a 2-pc rear main crank (forged) for another engine project that probably won't get off the ground. I also came across a killer deal on a UTGC clutch package and the flywheel is for a 2-pc rear main crank. Should I buy this part or **** it up and fork over the $500 for the UTGC flywheel, OR, should I find a cheaper hobby so my wife won't ***** at me so much??

3rd option really is not an option.

[This message has been edited by TEAMPCR (edited December 20, 2004).]

BIGG C
Dirt Maniac

Total posts: 114
posted December 20, 2004 06:29 PM  
What can you find to do that the 3rd option would apply? Next time that you are all greasy just grab her and kiss her and think how lucky that you are for her to put up with you. BIGG C

LATE MODEL 9W
Dirt Full Roller

Total posts: 66
posted December 21, 2004 10:45 AM  
Got that adapter on my bowtie block and it works great, no problems!

Back to the Archives