The Dirt Forum for More Information
Topic: torklink tlm1000 manifold - what cam works best ?
Dirt Forum Racer
Total posts: 96
posted November 28, 2004 10:06 PM
I bought a torklink tlm1000 manifold for my 377. I called Hi-Tech tech susport and they where not much help. They only have a tappet cam and there specs use a 1.50 rocker. Has anyone used this intake with a roller cam? Is this a good intake?
Here are the there tappet specs.
intake @ cam 3574 @ valve 536
exhaust @ cam 3754 @ valve 563
cam timing open closed dur.
@ .020 intake 33.0* btdc 75.0* abdc 288
exhaust 83.0* bbdc 37.0* atdc 300
RPM 3800 - 7200
cam timing opens closes lift
@ .050 intake 18.0* btdc 54.0*abdc 107
exhaust 68.0 bbdc 16.0*atdc 117
cam timing duration
Total posts: 493
posted November 29, 2004 06:07 AM
i have one i used on a 360 roller motor this year, i dont have much to compare it too however, the other roller motor i used this year had a brodix intake and was a lot better motor, but then again it cost about twice as much also.
The Joy of Six website
Dirt Full Roller
Total posts: 48
posted December 01, 2004 04:23 PM
The comp 12-500-5 works great with that intake and a 500cfm 2brl 1.6 int 1.5 ex rockers.
Back to the Archives