Visit The Dirt Forum for More Information

Author Topic:   pill question for kse pump
Dirt Full Roller

Total posts: 52
posted September 11, 2002 10:35 PM
we may be a little lean with the pill we have in now,first problem was tryig to slow the flow down,way too much with the pill they send,so what do you do ? buy the whole pill Kit!!we run 5/8 supply,1/2 return,750 cfm carb on alcohol.we do have a ball valve in the return,which could be closed up a radiator,new fan blade,stewart water pump,new belts,220-230 too hot.
if any of you guys have any ideas i thank you for your help.

Dirt Maniac

Total posts: 119
posted September 17, 2002 07:00 AM
I ran into the same situation and finally stepped my fuel line down to 1/2" and 'stretched' the spring slightly to help the rough idling condition.

Good luck!

Dirt Full Roller

Total posts: 65
posted September 17, 2002 09:00 AM
what I did was to shim up the spring by putting a 3/16 backup washer for the rivit's under the spring to get the correct popoff pressure , I ran mine at 10 lbs at 6000 rpms it left it at 3lbs at idle..

Back to the Archives