Visit The Dirt Forum for More Information

Author Topic:   Roll onto RR
3modump
Dirt Roller

Total posts: 7
posted August 28, 2002 09:16 PM
We have a DW-8 4bar LR, and z-link RR. While the track is still a little tacky the car will roll over onto the RR quite a bit, but when the tracks get really slick, the car usually wont roll over at all. What could be the difference, besides the track is slicker? and what can be done to make it roll over on RR when track is really Slick?

shorty panhard bar on left side
solid pull bar
LR spring in front
RR spring in back

WPP
Dirt Maniac

Total posts: 162
posted August 28, 2002 09:42 PM
What angle do you have on the short panhard bar i also a DW 8 and i just moved my bar down to 7 inches on the chassis and 2nd hole on the pinion it was 8 1/4 on the chassis just too much roll and too hard to drive when you got off the gas 325 right rear spring got 4 1/2 inches of travel on the right rear shock i just like my car to be smoother this is a swingarm

Geffy95x
Dirt Forum Racer

Total posts: 78
posted September 21, 2002 12:30 PM
Put some weight behind the right rear.

Back to the Archives