posted August 12, 2002 10:49 AM
The rear of our car just WILL NOT lift and I am not sure what our problem is. Any ideas would be GREAT. DW 2-link Short LR trailing arm @ 10degrees Long RR arm @ 5degrees. J-bar second hole from bottom w/ 2" of rake. Rubber pull bar w/ 3/4" preload @ 19degrees and pinion @ 8degrees.
With all the solid pull bar talk, thinking about putting a ton of preload in the pull bar to make it more like a solid bar...think this will work?
Thanks in advance!
CUSTOMPERFORMANCE Dirt Freak
Total posts: 464
posted August 12, 2002 11:18 AM
what are the spring rates shock #'s and weight %?
dluna Dirt Full Roller
Total posts: 42
posted August 12, 2002 02:47 PM
Shocks are all Bilstein: LF: 50/50 RF: 30/50 LR: 50/50 RR: 50/50 Spring rates: LF: 650 RF: 750 LR: 200(front of axle) RR: 125(on top of axle) - did have a 150 here but was a little loose coming out so we tried 125...didn't really tell much of a difference this weekend. Weight Dist WITHOUT driver: Cross: 49.8% Rear: 55.9% Left: 52.5%