Visit The Dirt Forum for More Information

Author Topic:   WHEEL SPACERS
G17RACING
Dirt Roller

Total posts: 22
posted April 15, 2002 12:54 PM
DOES ANYONE KNOW WHERE TO FIND A 2" WHEEL SPACER THAT BOLTS TO 5"X5 HUB AND HAS 5X5 STUDS IN THE SPACER? I CAN FIND SPACERS THAT ADAPT 4.5 AND 4.75 TO 5X5 BUT NO 5X5 TO 5X5.

49mtmod
Dirt Full Roller

Total posts: 53
posted April 15, 2002 01:24 PM
Go to speedway motors and do a search on the keyword "wheel adapter". They have a Wilwood adapter that might be what you are looking for.

www.speedwaymotors.com/

nut3d
Dirt Maniac

Total posts: 110
posted April 15, 2002 05:15 PM
I know they make spacers that slide over the studs in 1 inch thick spacers. try using that.

Sincerley,
Aaron Downing

#3D IMCA Modified

racerwilson
Dirt Roller

Total posts: 21
posted April 23, 2002 11:41 AM
using a 2" spaceron a 5"x5 hub is not a ood idea. do it the right way and change wheels
with the proper offset.

PJay72
Dirt Roller

Total posts: 11
posted April 25, 2002 10:37 PM
I have a two inch wheel spacer. I think that the left axel tube is too short for, so I run a 2 inch wheel all the time. So, when it goes dry slick I need a spacer to get the LR sticking out. I can't remember where I found them. They aren't very a popular item, I guess. I'll look around and see if I can find where to get them. If I remember right it was about $70.
Pete

G17RACING
Dirt Roller

Total posts: 22
posted April 26, 2002 07:49 AM
THANKS FOR YOUR HELP! I HAVE SEEN SOME SPACERS ON CARS @ RACETRACKS THAT WENT ON YOUR LUG STUDS AND HAD ADDITIONAL STUDS ON THE SPACER FOR THE WHEEL. THE ONLY ONES I HAVE FOUND IN THE CATALOGS ADAPT OTHER WHEEL PATTERNS.

nut3d
Dirt Maniac

Total posts: 110
posted April 26, 2002 04:00 PM
u are talking about the ones that ***** on your studs not slide over them? if u are i would check with jegs summit and longarce. I belive longarce sell's them.

Back to the Archives