Visit The Dirt Forum for More Information

Author Topic:   Lift/Pull Bar ?????
mandi ward
Dirt Roller

Total posts: 6
posted April 11, 2002 10:43 PM
I Just had a funny idea . What would happen if i were to install Spring loaded or rubber biscuit pullbar off the top off the rear housing and mounted it to the lift bar, Would just slow down the whole process or what would happen? Anyone ever try this? It would be easy to do just make lower part of lift bar and install swedge tube with heims on top of housing and on lift bar? Any Ideas or just plain dumb?

Dirt Freak

Total posts: 464
posted April 12, 2002 02:39 PM
It would be better to use one or the other and not both together.

Dirt Full Roller

Total posts: 63
posted April 13, 2002 10:47 PM
If you mounted the "pull bar" from the rear end to the "lift bar" what good would it do? I you mount the pull bar back to the frame and use the lift with just the chain mount it will work. Go look at I think they have a picture of this set up. ltr good luck

Dirt Administrator

Total posts: 5060
posted April 14, 2002 04:38 PM UIN: 16262997
If you mount the pull bar from the top of the rearend to the lift bar, it wont do anything.


Back to the Archives