Visit The Dirt Forum for More Information

Author Topic:   tierod help
freeland63
Dirt Roller

Total posts: 9
posted March 08, 2002 06:54 PM
the stub on my mod is 68-72 chevelle.The car when I purchaced it had inner tierods that dropped from the center link at an angle about 3", then whent straight out. What are these rod from? when I try to get 68-72 chevelle rods from parts store they give me ones that come straight out from the center link. need the ones that drop to correct a bumpsteer problem. thanks in advance

Greggie
Dirt Full Roller

Total posts: 66
posted March 08, 2002 07:04 PM
Are the angled one just heated and bent? I've never seen anything like what you are describing.

Greggie

freeland63
Dirt Roller

Total posts: 9
posted March 08, 2002 07:17 PM
no they look totally stock. they have the #4075 stamped in the back of them in the tin part next to the grease fitting, and they have 5/8" size threads

KK17
Dirt Maniac

Total posts: 144
posted March 08, 2002 07:26 PM
you could look at an older camaro inner but just the way you described it I would say someone used the torch on them

Jay Ihrke
Dirt Newbie

Total posts: 2
posted March 08, 2002 08:34 PM
Check out the newer camero or trans-am.

2nd2none
Dirt Maniac

Total posts: 193
posted March 08, 2002 09:05 PM
the tie rods are for a camaro, not for sure if they are for a metric car or chevelle. Ive got one here its part # 4076 for inner right so i would assume the 4075 is for inner left. i bought it by mistake and just havent gotten around to takin it back yet. try calling your chassis manufacturer and see what they say. I personally run moog # ES 403 L inner and use the swedge tube/heim end outter to set bump steer, little easier to do it that way than tweakin a stock type tie rod. BTW i have dw7 chevelle car.

[This message has been edited by 2nd2none (edited March 08, 2002).]

freeland63
Dirt Roller

Total posts: 9
posted March 11, 2002 04:06 PM
called chassis builder today and found out what they are. thier inner tie rods from a '74 camaro. Have to have these if you have 68-72 chevelle stub and lowers and pinto spindles, makes it so much easier to get rid of bumpsteer and get frame clearence. thanks to all that responded!!!!!!!!!!!!!!!11

doug
Dirt Roller

Total posts: 25
posted March 11, 2002 06:55 PM
do you have the part number for the tirod i would appreciate it please. thank you

The Buzzard7

c21
Dirt Maniac

Total posts: 122
posted March 12, 2002 10:22 AM
74 Camaro inner tie rods:
left DS782,
right DS781

doug
Dirt Roller

Total posts: 25
posted March 13, 2002 08:41 PM
thanks for the part numbers i have a salvage yard if you ever need anything let me know thanks the buzzard .

neverenoughbrew
Dirt Full Roller

Total posts: 56
posted March 14, 2002 07:43 AM
Besides our Dart Mod (dirt) We have an Ellis asphualt mod, chevelle clip, pinto spindles, the bent inner tie rods are stock pieces that are notheated and bent. I believe they are mid 70's Camaro inner tie rods.

Back to the Archives