Visit The Dirt Forum for More Information

Author Topic:   3-link set up
Dirt Roller

Total posts: 23
posted March 01, 2002 05:51 PM
i am new to mods and will be running wissota midwest mod. My question on 3 link is should i run my springs in front or behind the rear end? LR spring is 225lb and RR spring is 200lb my car is older and a little heavier than the nerwer ones. Everyone that I know in this class has theirs mounted on the axel in the stock locations. Any suggestions on this would be helpful. The car came with LR spring in front and RR spring behind of axel. Thanx for ur help

Dirt Freak

Total posts: 252
posted March 02, 2002 10:05 PM
Leave the left rear in front and put the right rear on top of the axle. I tried it with the right rear behind the axle but I never really liked the way felt.

Dirt Newbie

Total posts: 3
posted March 02, 2002 10:22 PM
leave the left in front and clamp it up. this will help bite temendously. Leaving the rt behind will help tighten car on corner enrty. If you do this, float, do not clamp rt rear unless you leave in frt. that to will help forward bite. The sping on top of axle on rt has similar as rt behind but just doesn,t seem to tighten car enough.

Back to the Archives