Visit The Dirt Forum for More Information

Author Topic:   lost biscuit
yellowjacket45
Dirt Full Roller

Total posts: 37
posted February 09, 2002 08:13 PM
I am wanting to buy some biscuits for a pull bar and spring bar and was told that they are the same thing that a ford uses on thier trucks. I've been to the auto parts store but can't find the right ones with the 3/4 hole. Any body know what ford they come from.

LITTLEMAN
Dirt Maniac

Total posts: 130
posted February 10, 2002 12:11 PM
I've used the bisquits from the lower contol arm of a ford torino the ones that goes on the stabillizer brace to the front of the frame69 to 76 i think is the years they come on.are you trying to save a few bucks on bisquits? or just looking to get them from your parts store?just curious hope this helps ya. litteman

dkandy94
Dirt Roller

Total posts: 25
posted February 10, 2002 02:51 PM
most any rear wheel drive ford or merc car with the front strut rod should work for you. torino, galaxie, older mustang & cougar, t bird, are just some of these cars. 66-79 years. Hope this helps.

yellowjacket45
Dirt Full Roller

Total posts: 37
posted February 10, 2002 05:46 PM
thanks for the help guys,and yes littleman i'm trying to save money and get them uptown at the local store. mainlly because we build our own spring bars and pull bars. we build most all our stuff we use my partner is a tool@dye maker and we vhave access to a laser and cnc machine.

LITTLEMAN
Dirt Maniac

Total posts: 130
posted February 10, 2002 05:53 PM
IS THERE AN ECHO IN HERE?

yellowjacket45
Dirt Full Roller

Total posts: 37
posted February 11, 2002 09:03 PM
hey guys i need more help i need to narrow the car selection on the biscuits down i went to the part store and they gave me 6 different choices of biscuits but they didnt have any in stock to compare to the one that i have

Back to the Archives