posted February 02, 2002 07:05 PM
Fellow mod drivers I purchased a 2000 harris dirt chassis & I need a little help.I dont know which pitman arm and Idler to use.I dont want to buy all new from harris,Ive got a few different sizes all ready.Im currently running a 3 bolt steering gear with small input shaft Thanks For The Help Rick
CUSTOMPERFORMANCE Dirt Freak
Total posts: 464
posted February 03, 2002 03:44 AM
From about 98 up they use a stock chevelle idler arm and pitman arm now. 97 and older used the extended ones when the steering wasdmoved forward 2 inches and they were bent flat.
race8k Dirt Forum Racer
Total posts: 98
posted February 03, 2002 09:46 AM
If it is a 2000 and has a bolt on top cover it will use the stock chevelle pitman arm68-72.If it is the 605 box with the round snap ring cover it will be from the sme years chevell with manual stearing.These are getting hard to find.
holeshot Dirt Full Roller
Total posts: 51
posted February 05, 2002 01:39 PM What is the reason for this movement forword on the box. I just got my new harris and this is done my 99 was not moved forword
wdf Dirt Newbie
Total posts: 4
posted February 05, 2002 01:54 PM
quote:Originally posted by holeshot: What is the reason for this movement forword on the box. I just got my new harris and this is done my 99 was not moved forword
they moved it forward for better geometry. imca didn't like the fact they altered a stock componet (pitman arm) and made them stop.