Visit The Dirt Forum for More Information

Author Topic:   3 speed 2nd gear ratios
gofast27
Dirt Roller

Total posts: 5
posted January 07, 2002 09:35 PM
I know a while back that there was a post about the 2nd gear ratio of saginaw 3 speeds?
does anyone know what ratio it would be if the input shaft has 3 groves or does anybody know where you would locate info on this?

dreamcatcher
Dirt Full Roller

Total posts: 70
posted January 07, 2002 09:52 PM UIN: 14464409
try these.
Transmission Ratios
Muncie 4 Speed
1st 2nd 3rd 4th
No Lines 2.56 1.91 1.48 1
1 Line 2.2 1.64 1.28 1
2 Lines 2.52 1.88 1.46 1

Second Design T-10 (Super T-10)

1st 2nd 3rd 4th
2 Lines 2.43 1.61 1.23 1
3 Lines 2.64 1.75 1.33 1
5 Lines 3.42 2.28 1.46 1
6 Lines 2.88 1.91 1.33 1

Saginaw 3 Speed

1st 2nd 3rd
No Lines 2.85 1.68 1.00
1 Line 2.54 1.50 1.00
2 Lines 3.11 1.84 1.00
3 Lines 3.50 1.89 1.00

Saginaw 4 Speed

1st 2nd 3rd 4th
No Lines 2.84 2.01 1.35 1.00
1 Line 2.54 1.80 1.44 1.00
2 Lines 3.11 2.20 1.47 1.00
3 Lines 3.50 2.47 1.65 1.00

Power Glide
Low High
1.76 1.00
1.82 1.00
The 1.76 has a 12 7/8" long input shaft and a cast steel carrier.
The 1.82 has a 12 5/8" long input shaft and a stamped steel carrier.


jammin
Dirt Administrator

Total posts: 5060
posted January 08, 2002 07:25 AM UIN: 16262997
Just a reminder....thse are in the toolbox.

jammin

Back to the Archives