Visit The Dirt Forum for More Information

Author Topic:   Camshafts
Dirt Roller

Total posts: 20
posted December 28, 2001 07:49 PM
Can anyone suggest a good camshaft grind for a 406 chevy? I'm going to use Brodix 11x heads (2.08",1.60"), KB 12.5:1 pistions, Eagle 6" rods.

Dirt Full Roller

Total posts: 40
posted December 28, 2001 09:54 PM
Call Crane Cams and they will set you up.

Dirt Administrator

Total posts: 5060
posted December 29, 2001 09:47 AM UIN: 16262997
If you will call of the sponsors of this forum, Charles can get you going really well. We use his cams in our motors and I will never run an over the counter cam in our mods again. I am giving out one of my secrets here, but it will help you if you can get a cam from him. He can dial right into your application and hit it right on the head with what you need.

Dirt Roller

Total posts: 20
posted January 01, 2002 08:26 AM
Thanks, Jammin, I'll give them a call.

Dirt Freak

Total posts: 242
posted January 03, 2002 04:31 PM
Try calling dave crower @ crower cams, he has done dozens of cams for me and they will custom grind one for the same cost as an off the shelf item.

Back to the Archives