Visit The Dirt Forum for More Information

Author Topic:   converting asphalt mod to dirt mod
pipes
Dirt Roller

Total posts: 17
posted December 24, 2001 04:00 PM
Ok this is what we're doing
we have a camaro clip underslung asphalt mod and we're converting it to run dirt
the track is 1/3 mile clay and from the pics very little bank,
any suggestions regarding spring rate, shocks, frt end settings, gear to pull 7200,
panhard mounting and type ,
The rear end is three link with rubber biscut in top link,.
and by the way this is our first attempt at running dirt
as well the engine rules is
350 ci
hydralic cam
9:1
500cfm 2 bbl carb 4412
iron heads
automatics or manuals allowed
tires are Mcreary 11" wide on 10" rims
Thanx guys

------------------

Gene
Dirt Maniac

Total posts: 183
posted December 24, 2001 08:39 PM
Raise the frame so you have about 6" on each cornor. Raise the fuel tank.
800lf 850rf
7" 7 7" 5-3
15# air 15#
225lr 200rr
9"3-5 9" 5
8# air 10#
This is a pure guess!

[This message has been edited by Gene (edited December 27, 2001).]

CUSTOMPERFORMANCE
Dirt Freak

Total posts: 464
posted December 25, 2001 07:32 PM
its not hard to do . contact me by pm or email. i need more info to help out you out more.

Back to the Archives