Visit The Dirt Forum for More Information

Author Topic:   A special thanks to Kinetic Performance and CamCraft Cams!
jammin
Dirt Administrator

Total posts: 3279
posted June 10, 2001 01:53 AM UIN: 16262997
We put a very low budget motor in the modified to prove a point. We put a very good camshaft from CamCraft and Cramac Oil in our car and guys, I can't believe how this engine pulls.....we hot lapped it this weekend to prepare for a mod special locally here next weekend and tested our stuff out to make sure it would hold up. The cam and oil are unbelievable....it pulled and pulled and pulled for days.....all on a little 11 to 1 flat top motor. Nothing special about this engine but the Camshaft was ground for it and the oil gives us about 10 more horses. If you haven't called these guys, your crazy...they are simply awesome!
www.dirt.addr.com/kineticperformance www.camcraftcams.com

Check their products out.....you will not be sorry you did....well worth the time.


jammin

race8k
Dirt Full Roller

Total posts: 42
posted June 10, 2001 09:42 AM
It's amazing what will run in a mod. The trick is not always in the motor.What heads do you run on this engine?

jammin
Dirt Administrator

Total posts: 3279
posted June 10, 2001 11:39 AM UIN: 16262997
Bone stock production....you wouldnt believe it.....small, small valves......I had several people talking to me about how strong it sounded....LOL...little do they know....I promise you, it isn't the heads.....1.86 intakes....LOL....turned it 6500 and never fell off....Makes you wonder doesnt it...

race8k
Dirt Full Roller

Total posts: 42
posted June 10, 2001 01:20 PM
must be 305 heads. Have ran them before and had same results.Used to have 1.94 intakes in mine.The engine we run know is a 360 cast crank speedway piston unbalanced with speedway cam and world product heads. Plenty of power when the car works.

Back to the Archives