Visit The Dirt Forum for More Information

Author Topic:   Looking for product!
Flatfoot
Dirt Roller

Total posts: 23
posted May 24, 2001 10:52 AM
I recently built a tire rack and misc. racks for my trailer out of square tubing. I am looking for square plastic plugs to tap in the ends for finished look. Found a company in Denver that makes them but have to buy 2000 or more. Any ideas or sources for these plugs would be appreciated. Thank You!

KPLugnut
Dirt Full Roller

Total posts: 57
posted May 24, 2001 11:52 AM
Lowes or Chase Pitkin sells them as furniture leg plugs, I believe. I've used them in the past for exactly the same use you are hoping to.

Good luck,
KPLugnut

Steph
Dirt Full Roller

Total posts: 60
posted May 24, 2001 12:37 PM UIN: 6762482
Haven't seen them, but why plastic? Why not cut metal squares and simply weld ends on?

Flatfoot
Dirt Roller

Total posts: 23
posted May 24, 2001 03:27 PM
Thanks lugnut, after putting this post up I found a company called Niagara plastics out of PA. Steph thanks for the idea but these are quick and make the finished product look store bought. Thanks for your efforts.

start79
Dirt Full Roller

Total posts: 56
posted May 24, 2001 05:28 PM
Triple S steel in Houston carry's them. If you can't get em let me and I'll pick some up and mail to you.

Flatfoot
Dirt Roller

Total posts: 23
posted May 25, 2001 09:20 AM
Thanks 79 I appreciate the offer. I will try this Niagara Plastics first. Thanks for the response.

Back to the Archives