Visit The Dirt Forum for More Information

Author Topic:   mod spindles
poboy2
Dirt Forum Racer

Total posts: 95
posted April 21, 2001 04:47 PM
I'm putting together a mod chassis that I bought, working on the front end. It uses a chevelle front stub(69') and uses dirtworks upper control arms. What spindles would work the best for me. This is my first mod, and is by no means a jewel..LOL. I know that alot of people like the pinto spindles, but I have heard that they are hard to get the bumpsteer correct. What about metric spindles? or spindles from 73-77 midsize chevelle?

KK17
Dirt Full Roller

Total posts: 75
posted April 21, 2001 05:13 PM
I would go to dirtworks website and look at their recomendations. You can run the metric big or small with the lower ball joints reamed to the chrysler *****in. The upper is where the problem is. I ran a monoball, you need to check your rules. The upper arms have to be at the proper angles to get the roll center and camber gain correct.

Back to the Archives