Visit The Dirt Forum for More Information

Author Topic:   harris uppe torque link HELP
b00
Dirt Full Roller

Total posts: 27
posted April 07, 2001 10:52 PM
how much free play should be in the spring should it be pre loaded??
right now it has about a 1in of free travel sitting you can move the spring
the pinion angle is fine but the spring thing should it be that loose?

dqr-7
Dirt Roller

Total posts: 18
posted April 07, 2001 11:04 PM
quote:
Originally posted by b00:
how much free play should be in the spring should it be pre loaded??
right now it has about a 1in of free travel sitting you can move the spring
the pinion angle is fine but the spring thing should it be that loose?


no. there should be abuot 1/8 inch preload

b00
Dirt Full Roller

Total posts: 27
posted April 07, 2001 11:06 PM
on the spring or the biscuit?

dqr-7
Dirt Roller

Total posts: 18
posted April 07, 2001 11:21 PM
quote:
Originally posted by b00:
on the spring or the biscuit?
on the spring


b00
Dirt Full Roller

Total posts: 27
posted April 07, 2001 11:27 PM
what should it be from the busket to the plate
thanks for all your help im glad im not the only one thinking racing on a sat nite

dqr-7
Dirt Roller

Total posts: 18
posted April 08, 2001 12:29 AM
ill check but i think it was 3/4 inch


jammin
Dirt Administrator

Total posts: 3279
posted April 08, 2001 12:35 AM UIN: 16262997
one thing to remember....the more preload...the more spring rate.

Back to the Archives