Visit The Dirt Forum for More Information

Author Topic:   BERT - Shifting Pattern
Dirt Full Roller

Total posts: 45
posted March 15, 2001 08:47 PM
Could someone please explain the shift pattern on a Bert for me. Thanks

Dirt Full Roller

Total posts: 56
posted March 15, 2001 09:15 PM
If it's like mine it has three levers. low, high & reverse. Start off by placing the low gear level in position, press in on the clutch and get the car moving. Once the car is moving 10-15 mph let off the clutch, place the low gear lever in neutral and pull the high gear lever into place. Good Luck!

Dirt Full Roller

Total posts: 45
posted March 16, 2001 03:31 PM
there are only 2 levers one is reverse and the others are high/low I need to find out the shifting pattern on the thing ( where the levers are to what gear it is in )

Dirt Maniac

Total posts: 134
posted March 16, 2001 03:57 PM UIN: 27426975
Mine is the same as yours. Outside shifter (closest to the passenger side of car) is reverse, and push forward on it.
Inside shifter (closest towards drivers door) is: 1st is towards the motor, and 2nd is to the rear.

Hope this helps


Back to the Archives