Visit The Dirt Forum for More Information

Author Topic:   Bedford and Cumberland make the switch to AMRA
Western PA MOD GUY
Dirt Roller

Total posts: 13
posted February 28, 2001 07:00 PM

Does anyone know the dimensions of the spoiler that is allowed in AMRA? How tall is it allowed to be? Sideboards? Thank you

Roadhzrd
Dirt Maniac

Total posts: 101
posted March 01, 2001 02:33 AM UIN: 28276986
The spoiler can be 8" by 66" and the side spoiler can be 24" by 8" with a 4" horizontal plane at the upper aft corner and a 2" vertical plane at the front of the side spoiler. The www.AMRAmodified.com site's car rules page was updated yesterday but the car specs page is still under construction. The major rule changes for this year are the ends of the rear bumper has to be bent in 90 or 180 degrees, and the drivers door bars must be covered from the top door bar to the bottom door bar and from front post to back post with min 1/8 inch alum or steel. (do you see the connection?) And only Hoosiers after May 22.

Back to the Archives