Visit The Dirt Forum for More Information

Author Topic:   31 spline
Dirt Roller

Total posts: 17
posted January 29, 2001 12:38 AM
Will a 31 spline full spool fit into a 28 spline carrier?

Dirt Maniac

Total posts: 128
posted January 29, 2001 08:46 PM UIN: 23443678
Have done it many times unless we got lucky!

Racer 111
Dirt Forum Racer

Total posts: 92
posted January 29, 2001 08:51 PM
Just as long the bearing size is the same.There is 2 size's of bearings for the 9 inch that I know of.Big and small easy to tell.

Dirt Roller

Total posts: 18
posted January 29, 2001 09:03 PM
make sure to check to see if axle will fit before you set it all up install chunk in housing and try installing axles to find they dont go in. been there done it

Dirt Freak

Total posts: 218
posted January 29, 2001 09:49 PM
what dqr-7 is talking about is .....If you use the stock carrier and just put in a mini spool for a 31 spline the carrier needs to be drilled to 1 3/8" where the axles go into the carrier............If you don't do this before you put it all together you did all this work just for practice.........Just clearing it up a little......GOOD POINT DQR-7

Dirt Maniac

Total posts: 101
posted January 29, 2001 11:54 PM UIN: 28276986
I found that out once on race day. I thought I had all of my unknowns out of the way. whoops I ended up taking a die grinder to the opening on the pig and it worked fine.

Back to the Archives