posted February 05, 2003 08:49 PM
who makes the best adjustable spacer that fits the front of a metric? and do you have to do any work to the frame to make them work?
gould Dirt Maniac
Total posts: 125
posted February 06, 2003 09:24 PM
speedway motors has them. $25 each
STREET16 Dirt Full Roller
Total posts: 32
posted February 06, 2003 10:14 PM
You will need to flatten out the tabs in the spring pocket for the spacer to sit flat. I ran the speedway spacers, and they moved around alot and caused some weird handling problems. I canned them and put in stock length springs. You might want to see if you need to weld them in place - I didn't. Some of the other drivers may have had success with them, find out what they did.
[This message has been edited by STREET16 (edited February 06, 2003).]