Visit The Dirt Forum for More Information

Author Topic:   9" in Metric ??
dean_7585
Dirt Forum Racer

Total posts: 88
posted January 06, 2003 07:38 PM
What width 9" should I get for a metric car ??
Normaly I get whatever one is availible, but I'd like to make sure I'm getting to right one.

jhon hollomon
Dirt Maniac

Total posts: 181
posted January 06, 2003 09:37 PM
I'd say a 58" to a 60" would be about right.

dean_7585
Dirt Forum Racer

Total posts: 88
posted January 07, 2003 06:19 AM
How should I measure that, from the outside of the housing or the outside of the axles ???

outlawstock17
Dirt Forum Champ
Total posts: 620
posted January 07, 2003 07:08 AM
axle flange to axle flange dean.

dean_7585
Dirt Forum Racer

Total posts: 88
posted January 08, 2003 08:35 PM
I think I'm a bit wide, cuz the 9" that I have measures 63" from the outside of the flanges.

pdub25
Dirt Roller

Total posts: 14
posted January 09, 2003 08:15 AM
We've been narrowing our own the last couple years, with real good luck. Its fairly simple to do. Send me a pm if you're interested.

DL406
Dirt Roller

Total posts: 16
posted January 09, 2003 06:06 PM
You want to get the 60 inch centered for the metric chassis.

66jj
Dirt Freak

Total posts: 352
posted January 09, 2003 08:33 PM
i know where theres one with aftermarket axles and all the mts.

i think its 350.00

e mail me for more info.

jeff

66jj
Dirt Freak

Total posts: 352
posted January 09, 2003 08:34 PM
i know where theres one with aftermarket axles and all the mts.

i think its 350.00 includes brakes

e mail me for more info.

jeff

o5racer
Dirt Maniac

Total posts: 115
posted January 18, 2003 09:28 PM
I went with a 62 and had the pinion offset to the right so that both axles are the same length. less spare parts that way.

Big Dawg
Dirt Full Roller

Total posts: 36
posted February 02, 2003 02:26 PM
I run a 60" with my metric car.works great.

Back to the Archives