Visit The Dirt Forum for More Information

Author Topic:   26 11/16th ford axle HELP!
dman60
Dirt Full Roller

Total posts: 55
posted December 29, 2002 10:05 PM
I have an old galaxie 500 rearend. I broke the 26 11/16 inch driver's side axle. Anybody know of another donor car or truck.
Thanks,
dman

sixwillwin
Dirt Freak

Total posts: 215
posted December 29, 2002 10:32 PM
there is a guy on ebay that sells Ford housings and axles of ALL sizes. Could not find it right now though. Try later and search under ford axles or ford housings.
OR buy a moser axle

outlawstock17
Dirt Forum Champ
Total posts: 620
posted December 30, 2002 06:57 AM
i believe it's the same as a 67-70 mustang/cougar.

fastrack1
Dirt Full Roller

Total posts: 73
posted December 30, 2002 11:30 AM
I THINK I MAY HAVE ONE I WILL CHECK AND SEE WHAT BOLT PATTERN DO U NEED I AM IN SOUTH GA NEAR ALBANY BUT I MAY SHIP IT IF U NEED ME TO

dman60
Dirt Full Roller

Total posts: 55
posted December 30, 2002 04:48 PM
I need a 5 on 5 bolt pattern with the small diameter bearing. I don't know if the inside diameter is the same or not, but I compared it to a newer axle and the bearing is smaller. I'll replace the bearing, I just need it to fit the axle right. I can get you more info if you need it.
You can email me at
dman651101@cs.com
Thanks alot,
Stan

fastrack1
Dirt Full Roller

Total posts: 73
posted December 30, 2002 09:51 PM
SORRY NO GO ON THE AXLE 4.5 BOLT PATTERN AND 25.5 LONG

outlawstock17
Dirt Forum Champ
Total posts: 620
posted December 31, 2002 08:22 AM
that's a maverick axle fastrack1. do you need some more? i've got 3 sets with good bearings.

dman60, have your axles been re-drilled to 5x5"? if you can't find an old galaxie to swipe an axle from, you may have to use the mustang axle and re-drill it. older mustangs are 5x4 1/2" as well. also, 8" and 9" axles are interchangable.

Back to the Archives