Visit The Dirt Forum for More Information

Author Topic:   Which intake to use??????
ars
Dirt Full Roller

Total posts: 34
posted December 21, 2002 07:20 PM
Our rules say a stock cast iron intake must be used,no Z/28 or marine. We run a Holley #80787, 350 cfm. Which would be better, a canadian 2 barrel intake or a quadrajet intake with an adapter. Thanks and Merry Christmas

superdave
Dirt Forum Racer

Total posts: 89
posted December 22, 2002 12:13 PM
A quadrajet with adapter is the way to go. Larger plenum and runners will help make more rpm's.

teamstertom
Dirt Forum Racer

Total posts: 89
posted December 22, 2002 02:09 PM
I was over on ebay,and there are a couple of those good 2 barrel manifolds from the Chevrolets of Canada.
If you use the 4 barrel manifold,there are spacers on the market to assist you in properly adjusting the 2 barrel on the 4 barrel manifold. A couple of suggestions would be to look at the Brzezinski website,or www.wehrsmachine.com website. I am sure that a couple of the dirt forum sponsors may have something also.

ars
Dirt Full Roller

Total posts: 34
posted December 22, 2002 03:39 PM
Thanks Ya'all for the advice

Back to the Archives