Visit The Dirt Forum for More Information

Author Topic:   Spring Height
Dirt Roller

Total posts: 8
posted November 04, 2002 01:26 PM
Changing from Asphalt to dirt going in to a street stock class. 3/8 mile dirt oval, metric 80's Monte. What height springs would be good to start tith they will be mounted in stock location no weight jacks. ANy help is appreciated.

redneck racing
Dirt Freak

Total posts: 276
posted November 19, 2002 06:14 PM
I run a 3/8 high bank but i also have wt jacks in the front. Read in ct or scr that if you are running dirt you want the car 1 inch higher than asphalt but i think it depends on how rough the track is. Id just get the stock height racing springs and try that if you need more height then use the adjustable spring spacers.Eddie

Dirt Maniac

Total posts: 115
posted November 21, 2002 08:02 PM
for a metric with no spacers you need 5 1/2x11 inch springs. Ultimate racing carries them.

Dirt Full Roller

Total posts: 69
posted November 26, 2002 05:34 PM
We run an 11 inch spring on the left front, 12 inch on the right front, and 13 inch springs on the rear.

Back to the Archives