Visit The Dirt Forum for More Information

Author Topic:   Trans mount ?
Dirt Roller

Total posts: 7
posted April 16, 2002 03:14 PM
I have solid motor mounts on my car. should I solid mount the trans mount also ?

Dirt Maniac

Total posts: 199
posted April 16, 2002 04:23 PM
I think chassis flex might cause something to break if all the mounts are solid. Now if the mount can flex you might be ok. In my I-stock I use solid front mounts and a new stock rubber rear mount.

Dirt Freak

Total posts: 298
posted April 16, 2002 06:17 PM
sleepy is 100% right!

redneck bubbas racing
Dirt Freak

Total posts: 213
posted April 16, 2002 10:49 PM
I have always run rubber motor mounts and solid tranny mounts, never broke a case. I had been told to do this but never really understood why. Thanks sleepy, the chassis flex is the awnser.

Dirt Full Roller

Total posts: 32
posted April 17, 2002 09:11 AM
A rubber trans mount is going to help keep the trans case from taking all of the abuse.
Sort of like a shock for it.


Scott Miller
TCI Automotive, LLC
662-224-8972 ext 332

Dirt Freak

Total posts: 237
posted April 17, 2002 10:22 AM
I run solid engine mounts in front. Solid mid-mounts between the engine and Powerglide. And nothing supporting the tranny tail.

Been this way for 2 years without a broken case.

Back to the Archives