Visit The Dirt Forum for More Information

Author Topic:   Need help
Coolhand
Dirt Roller

Total posts: 18
posted September 04, 2000 11:54 PM
I could use some help I have just purchased a 84 model Cutlass and was wondering if it is the same as a Monty carlo I have an old monty 1983 and want to use it for a parts car.

junkyard
Dirt Full Roller

Total posts: 32
posted September 06, 2000 07:24 AM
Everything is the same.

24ksi Racing
Dirt Roller

Total posts: 13
posted September 07, 2000 04:25 PM
....except for the obvious sheet metal differences. And you should also keep in mind that any Cutlass, Monte Carlo or Regal will all be the same. Back to '78, all of these plus the Malibu will be the same except for a few minor differences (such as standard studs on the axles as opposed to metric).

[This message has been edited by 24ksi Racing (edited September 07, 2000).]

PEDDLER
Dirt Maniac

Total posts: 148
posted September 07, 2000 06:52 PM
We ran an 82 cutlass and used sheet metal (front fenders,hood and doors from a monty) worked well.

Coolhand
Dirt Roller

Total posts: 18
posted September 07, 2000 08:53 PM
Thanks for the help everyone looking forward to talking to all of you.

junkyard
Dirt Full Roller

Total posts: 32
posted September 08, 2000 07:37 AM
Avoid the 78 spindles and rotors they use different bearings than the others.

Back to the Archives