posted July 17, 2000 09:54 AM
Running 3200# Super Stock setup with a IMCA pullbar and J-Bar with stock trailing arms.Pullbar has 800# spring is running straight forward off center of rear end with 10 degree down angle. J-bar hooked to passenger side frame and to pinion mount running level with center mounted on the centerline fo the axles. Is there any adjustment to pullbar or j-bar that would help with forward bite? Softer spring or angle change on pullbar or j-bar?
jammin Dirt Administrator
Total posts: 3279
posted July 17, 2000 11:04 AM If your wanting more forward bite, you can lighten the spring rate and it will help you.