Visit The Dirt Forum for More Information

Author Topic:   I've decided that now's the time to install some deep groove pulleyUnderdrive Pulleys
69-er
Dirt Full Roller

Total posts: 39
posted February 29, 2000 06:53 PM
I've decided that now's the time to install some deep groove pulleys to keep the belts from flying off. I'm having trouble finding a set for the alt, fan, crank AND power steering. All I have seen so far are fancy billet, cast aluminum, polished, etc. Doesn't anyone make a simple, stock type, steel, deep-groove, reduction pulley setup for Chevy's? I also can't seem to find a similer pulley for the power steering pump!

Larry

xcessivespeed
Dirt Full Roller

Total posts: 32
posted March 01, 2000 03:59 PM
I haven't seen any in any of my aftermarket
catalogs either, I would be interested in
some steel one's also. J.T.

Pickel
Dirt Freak

Total posts: 239
posted March 01, 2000 07:30 PM UIN: 25419780
best thing i have found was the upper pulley off the dodge 225 slant 6 and the lower off the chevy 250 6cly..some of the old pontiacs had the reduced pulleys to.. cant remember witch ones ...jus know it was off the old hourse power cars.. good luck

race8k
Dirt Full Roller

Total posts: 42
posted March 05, 2000 07:45 PM
If you just use the one for the crank it will slow everything else down. Also make sure that all pulleys are in alingement.If they are not it won't matter how slow you turn them.

Back to the Archives