posted February 19, 2003 09:26 AM
I have a set of dart iron eagle heads. Flat milled .125", gasket matched intake side, roller valve springs, stainless valves, titanium retainers. ***** in 7/16" studs and guide plates. These heads make a 56cc chamber.
Have about 30 shows on them since last winters rebuild till last june when motor was pulled out.
2nd2none Dirt Freak
Total posts: 368
posted March 28, 2003 11:39 AM
Price on these heads are reduced to $500!!!
They are however, not a complete set, just bare castings.