Visit The Dirt Forum for More Information

Author Topic:   cams/head
Adams64
Dirt Newbie

Total posts: 2
posted May 07, 2003 09:15 PM
What is the most you can mill a head down with the stock bottom end and what cam do you suggest running with it that isn't to radical as to not give it away to much....i don't car if it burbles a little but not way to much as my car is supposed to be run in a mostly stock class that limits radical cams.........thanks grant

shadoza
Dirt Maniac

Total posts: 101
posted May 08, 2003 11:57 PM
What kind of engine are you running?

Adams64
Dirt Newbie

Total posts: 2
posted May 10, 2003 12:14 AM
2.3L ohc ford

b4racing
Dirt Maniac

Total posts: 192
posted May 10, 2003 12:29 AM
The 510 crane is a good cam It would be real good for your use as I believe 7500 is the end of its power band.

shadoza
Dirt Maniac

Total posts: 101
posted May 10, 2003 02:40 AM
If you go and buy some studs to fit in your intake manifold lower bolt holes on the head, loc-tite them in, you can mill it down to where you start seeing those threads

Back to the Archives